xFusion Supplier Corporate Social Responsibility Code of Conduct
This xFusion Supplier Corporate Social Responsibility Code of Conduct (hereinafter referred to as "this Code of Conduct" ) is draft based on the Code of Conduct issued by the Responsible Business Alliance (RBA, formerly the Electronic Industry Citizenship Coalition EICC), and aims to establish various standards to ensure that the working environment in the supply chain is safe, workers are respected and enjoy dignity, and business activities meet environmental and ethical requirements.
To the maximum extent permitted by applicable laws and regulations, this Code of Conduct applies to suppliers and subcontractors (collectively referred to as "Suppliers") who provide products or services to xFusion and/or its subsidiaries and affiliates worldwide (hereinafter referred to as "xFusion"). The implementation of this Code of Conduct is based on full compliance with the laws and regulations of the countries/regions where they operate, and encourage Suppliers to refer to internationally recognized standards in addition to complying with laws and regulations, thereby promoting enterprises to assume social and environmental responsibilities and abide by business ethics, and do better than required by laws and regulations. This Code of Conduct will not override applicable laws and regulations, nor will it provide any rights not covered by applicable laws and regulations. When the content of this Code of Conduct conflicts with local applicable laws and regulations, Suppliers shall meet the more stringent standards.
By signing xFusion Supplier Corporate Social Responsibility Agreement, Suppliers shall be deemed to publicly support basic principles of this Code of Conduct, and to deploy and implement the requirements of this Code of Conduct in their respective organizations. In addition, Suppliers shall make its upstream suppliers aware of and implement the Corporate Social Responsibilities principles required by this Code of Conduct, and ultimately implement them throughout the entire supply chain. xFusion reserves the right to inspect the implementation of Corporate Social Responsibility by the Supplier upon reasonable notice.
This Code of Conduct is made up of five sections: labor, health and safety, environment, business ethics, and management systems.
Supplier commit to respect the human rights of workers, and to treat them with dignity. This applies to direct and indirect suppliers, as well as all workers including temporary, migrant, student, contract, direct employees, and any other type of worker. The labor standards are as follows:
Forced labor in any form, including but not limited to, bonded (including debt bondage) or indentured labor, involuntary or exploitative prison labor, slavery or trafficking of persons is not permitted. This includes transporting, harboring, recruiting, transferring, or receiving persons by means of threat, force, coercion, abduction or fraud for labor or services. There shall be no unreasonable restrictions on workers’ freedom of movement in the facility in addition to unreasonable restrictions on entering or exiting company- provided facilities including, if applicable, workers’ dormitories or living quarters. As part of the hiring process, all workers must be provided with a written employment agreement in their native language, or in a language the worker can understand, that contains a description of terms and conditions of employment. Foreign migrant workers must receive the employment agreement prior to the worker departing from his or her country of origin and there shall be no substitution or change(s) allowed in the employment agreement upon arrival in the receiving country unless these changes are made to meet local law and provide equal or better terms. All work shall be voluntary, and workers shall be free to leave work at any time or terminate their employment without penalty if reasonable notice is given, which shall be clearly stated in workers’ contracts. Supplier shall maintain documentation on all leaving workers. Employers, agents, and sub-agents’ may not hold or otherwise destroy, conceal, or confiscate identity or immigration documents, such as government-issued identification, passports, or work permits. Notwithstanding the foregoing, employers can only hold documentation if necessary to comply with the local law. In this case, at no time shall workers be denied access to their documents. Workers shall not be required to pay employers’ agents or sub-agents’ recruitment fees or other related fees for their employment. If any such fees are found to have been paid by workers, such fees shall be repaid to the worker.
Child labor shall not be used in any stage of manufacturing. The term “child” refers to any person under the age of 15, or under the age for completing compulsory education, or under the minimum age for employment in the country, whichever is greatest. Workers under the age of 18 (Young Workers) shall not perform work that is likely to jeopardize their health or safety, including night shifts and overtime. Supplier shall ensure proper management of student workers through proper maintenance of student records, rigorous due diligence of educational partners, and protection of students’ rights in accordance with applicable laws and regulations. Supplier shall implement an appropriate mechanism to verify the age of workers. The use of legitimate workplace learning programs, which comply with all laws and regulations, is supported. Supplier shall provide appropriate support and training to all student workers. In the absence of local law, the wage rate for student workers, interns, and apprentices shall be at least the same wage rate as other entry-level workers performing equal or similar tasks. If child labor is identified, assistance/remediation shall be provided.
Working hours shall not exceed the maximum set by local law. Further, a workweek shall not be more than 60 hours per week, including overtime, except in emergency or unusual situations. All overtime shall be voluntary. Workers shall be allowed at least one day off every seven days.
Compensation paid to workers shall comply with all applicable wage laws, including those relating to minimum wages, overtime hours and legally mandated benefits. All workers shall receive equal pay for equal work and qualification. Workers shall be compensated for overtime at pay rates greater than regular hourly rates. Deductions from wages as a disciplinary measure shall not be permitted. For each pay period, workers shall be provided with a timely and understandable wage statement that includes sufficient information to verify accurate compensation for work performed. All use of temporary, dispatch and outsourced labor shall be within the limits of the local law.
Supplier shall commit to a workplace free of harassment and unlawful discrimination. There shall be no harsh or inhumane treatment including violence, gender-based violence, sexual harassment, sexual abuse, corporal punishment, mental or physical coercion, bullying, public shaming, or verbal abuse of workers; nor is there to be the threat of any such treatment. Companies shall not engage in discrimination or harassment based on race, color, age, gender, sexual orientation, gender identity or expression, ethnicity or national origin, disability, pregnancy, religion, political affiliation, union membership, covered veteran status, protected genetic information or marital status in hiring and employment practices such as wages, promotions, rewards, and access to training. Disciplinary policies and procedures in support of these requirements shall be clearly defined and communicated to workers. Workers shall be provided with reasonable accommodation for religious practices and disability. In addition, workers or potential workers should not be subjected to medical tests, including pregnancy or virginity tests, or physical exams that could be used in a discriminatory way. This was drafted in consideration of ILO Discrimination (Employment and Occupation) Convention (No.111).
Open communication and direct engagement between workers and management are the most effective ways to resolve workplace and compensation issues. Workers and/or their representatives shall be able to openly communicate and share ideas and concerns with management regarding working conditions and management practices without fear of discrimination, reprisal, intimidation, or harassment. In alignment with these principles, Supplier shall respect the right of all workers to form and join trade unions of their own choosing, to bargain collectively, and to engage in peaceful assembly as well as respect the right of workers to refrain from such activities. Where the right of freedom of association and collective bargaining is restricted by applicable laws and regulations, workers shall be allowed to elect and join alternate lawful forms of worker representations.
Supplier recognize that in addition to minimizing the incidence of work-related injuries and illnesses, a safe and healthy working environment enhances the quality of products and services, consistency of production and worker retention and morale. Supplier also recognize that ongoing worker input and education are essential to identifying and solving health and safety issues in the workplace. The health and safety standards are as follows:
Worker potential for exposure to health and safety hazards (chemical, electrical and other energy sources, fire, vehicles, and fall hazards, etc.) shall be identified and assessed, mitigated using the Hierarchy of Controls. Where hazards cannot be adequately controlled by these means, workers shall be provided with appropriate, well-maintained, personal protective equipment and educational materials about risks associated with these hazards. Workers shall not be disciplined for raising any health and safety concerns.
Potential emergency situations and events shall be identified and assessed, and their impact minimized by implementing emergency plans and response procedures including emergency reporting, worker notification and evacuation procedures, worker training and drills, appropriate fire detection and suppression equipment, adequate exit facilities and recovery plans. Such plans and procedures shall focus on minimizing harm to life, the environment and property.
Procedures and systems shall be in place to prevent, manage, track and report occupational injury and illness, including provisions to encourage worker reporting, classify and record injury and illness cases, provide necessary medical treatment, investigate cases and implement corrective actions to eliminate their causes, and facilitate return of workers to work.
Worker exposure to chemical, biological and physical agents shall be identified, evaluated and controlled according to the Hierarchy of Controls. When hazards cannot be adequately controlled, workers shall be provided with and use appropriate, well-maintained personal protective equipment free of charge. Supplier shall provide workers with safe and healthy working environments. This includes, but is not limited to, maintaining ongoing, systematic monitoring of worker health and working environments.
Worker exposure to the hazards of physically demanding tasks, including manual material handling and heavy or repetitive lifting, prolonged standing, and highly repetitive or forceful assembly tasks shall be identified, evaluated and controlled.
Production and other machinery shall be evaluated for safety hazards. Physical guards, interlocks and barriers shall be provided and properly maintained where machinery presents an injury hazard to workers.
Workers shall be provided with ready access to clean toilet facilities, potable water and sanitary food preparation, storage and eating facilities. Worker dormitories provided by Supplier or a labor agent shall be maintained to be clean and safe, and provided with appropriate emergency egress, hot water for bathing and showering, adequate heating and ventilation, individually secured accommodations for storing personal and valuable items, and reasonable personal space along with reasonable entry and exit privileges.
Supplier shall provide workers with appropriate workplace health and safety information and training in the language of the worker or in a language the worker can understand for all identified workplace hazards that workers are exposed to, including but not limited to mechanical, electrical, chemical, fire and physical hazards. Health and safety related information shall be clearly posted in the facility or placed in a location identifiable and accessible by workers. Training shall be provided to all workers prior to the beginning of work and regularly thereafter. Workers shall be encouraged to raise health and safety concerns without retaliation.
Supplier recognize that environmental responsibility is integral to producing world-class products. In manufacturing operations, adverse impacts on the community, environment and natural resources shall be minimized while safeguarding the health and safety of the public. The environmental standards are as follows:
All required environmental permits, approvals and registrations shall be obtained, maintained and kept current, and their operational and reporting requirements shall be followed.
Emissions of pollutants and generation of waste shall be minimized or eliminated at the source or by practices such as adding pollution control equipment; modifying production, maintenance and facility processes; or by other means. The use of natural resources, including water, fossil fuels, minerals and virgin forest products, shall be conserved by practices such as modifying production, maintenance and facility processes, materials substitution, re-use, conservation, recycling or other means.
Chemicals, waste and other materials posing a hazard if released to the environment shall be identified, labeled and managed to ensure their safe handling, movement, storage, use, recycling or reuse and disposal.
Supplier shall implement a systematic approach to identify, manage, reduce and responsibly dispose of or recycle solid waste.
Air emissions of volatile organic chemicals, aerosols, corrosives, particulates, ozone depleting substances and combustion by-products generated from operations shall be characterized, routinely monitored, controlled and treated as required prior to discharge. Supplier shall conduct routine monitoring of the performance of its air emission control systems.
Supplier shall adhere to all applicable laws, regulations and customer requirements regarding the prohibition or restriction of specific substances in products and manufacturing, including labeling for recycling and disposal.
Supplier shall implement a water management program that documents, characterizes and monitors water sources, use and discharge; seeks opportunities to conserve water; and controls channels of contamination. All wastewater shall be characterized, monitored, controlled and treated as required prior to discharge or disposal. Supplier shall conduct routine monitoring of the performance of its wastewater treatment and containment systems to ensure optimal performance and regulatory compliance.
Supplier shall establish a company-wide greenhouse gas reduction goal. Energy consumption and all relevant Scope 1 and Scope 2 greenhouse gas emissions shall be tracked, documented and publicly reported against the greenhouse gas reduction goal. Supplier shall look for methods to improve energy efficiency and to minimize energy consumption and greenhouse gas emissions.
To meet social responsibilities and to achieve success in the marketplace, Supplier and their agents shall uphold the highest standards of ethics including:
The highest standards of integrity shall be upheld in all business interactions. Supplier shall have a zero tolerance policy to prohibit any and all forms of bribery, corruption, extortion and embezzlement.
Bribes or other means of obtaining undue or improper advantage shall not be promised, offered, authorized, given or accepted. This prohibition covers promising, offering, authorizing, giving or accepting anything of value, either directly or through a third party, in order to obtain or retain business, direct business to any person, or otherwise gain an improper advantage.
All business dealings shall be transparently performed and accurately reflected on Supplier’s business books and records. Information regarding Supplier’s labor, health and safety, environmental practices, business activities, structure, financial situation and performance shall be disclosed in accordance with applicable regulations and prevailing industry practices. Falsification of records or misrepresentation of conditions or practices in the supply chain is unacceptable.
Intellectual property rights shall be respected; transfer of technology and know-how shall be done in a manner that protects intellectual property rights; and customer and supplier information shall be safeguarded.
Standards of fair business, advertising and competition shall be upheld.
Programs that ensure the confidentiality, anonymity and protection of supplier and employee whistleblowers shall be maintained, unless prohibited by law. Supplier shall have a communicated process for their personnel to be able to raise any concerns without fear of retaliation.
Supplier shall adopt a policy and exercise due diligence on the source and chain of custody of tantalum, tin, tungsten and gold in the products they manufacture to reasonably assure that they are sourced in a manner consistent with the Organisation for Economic Co-operation and Development (OECD) Guidance for Responsible Supply Chains of Minerals from Conflict-Affected and High-Risk Areas or an equivalent and recognized due diligence framework.
Supplier shall commit to protecting the reasonable privacy expectations of personal information of everyone they do business with, including suppliers, customers, consumers and employees. Supplier shall comply with privacy and information security laws and regulatory requirements when personal information is collected, stored, processed, transmitted and shared.
Supplier shall adopt or establish a management system whose scope is related to the content of this Code of Conduct. The management system shall be designed to ensure: compliance with applicable laws, regulations and customer requirements related to Supplier’s operations and products; conformance with this Code of Conduct; and identification and mitigation of operational risks related to this Code of Conduct. It should also facilitate continual improvement.
Supplier shall establish corporate social and environmental responsibility policy statements affirming Supplier’s commitment to compliance and continual improvement, endorsed by executive management and posted in the facility in the local language.
Supplier shall clearly identify senior executive and company representatives responsible for ensuring implementation of the management systems and associated programs. Senior management shall review the status of the management systems on a regular basis.
Supplier shall identify, monitor and understand applicable laws, regulations and customer requirements, including the requirements of this Code of Conduct.
Supplier shall identify the legal compliance, environmental, health and safety, labor practice and ethics risks associated with Supplier’s operations. Supplier shall determine the relative significance for each risk and implement appropriate procedural and physical controls to control the identified risks and ensure regulatory compliance.
Supplier shall establish written performance objectives, targets and implementation plans to improve its social, environmental, and health and safety performance, including a periodic assessment of Supplier’s performance in achieving those objectives.
Supplier shall establish programs for training managers and workers to implement Supplier’s policies, procedures and improvement objectives and to meet applicable legal and regulatory requirements.
Supplier shall establish a process for communicating clear and accurate information about Supplier’s policies, practices, expectations and performance to workers, suppliers and customers.
Supplier shall establish ongoing processes, including an effective grievance mechanism, to assess workers’ understanding of and obtain feedback on or violations against practices and conditions covered by this Code of Conduct and to foster continuous improvement. Workers shall be given a safe environment to provide grievance and feedback without fear of retaliation or reprisal.
Supplier shall conduct periodic self-evaluations to ensure conformity to legal and regulatory requirements, the content of this Code of Conduct and customer contractual requirements related to social and environmental responsibility.
Supplier shall establish a process for timely correction of deficiencies identified by internal or external assessments, inspections, investigations and reviews.
Supplier shall create and maintain documents and records to ensure regulatory compliance and conformity to company requirements along with appropriate confidentiality to protect privacy.
Supplier shall communicate the requirements of this Code of Conduct to upstream suppliers and monitor supplier compliance to the Code of Conduct.